Standing for Acrylonitrile Butadiene Styrene (thank goodness for this acronym), a black, rough plastic piping used in drainage
Opening in a wall, floor or ceiling that allows plumbing or electrical service
Fitting that joins pipes together
The path of the water flow; for example, the distance from a faucet to a drain
Shuts off gas manually
One of two vents that are part of a plumbing fixture
Mechanical plumbing devices installed in a plumbing system to prevent water from flowing backward in the system.
Sphere-shaped part of a joint that rests in a socket
Drain that leads to the main drainage line of a plumbing system
In drainage systems, this vent runs from the final traps of a horizontal drain line to the primary stack of vents
One of the more helpful common plumbing terms when troubleshooting, a plug that is used to access the pipe in order to clear an obstruction
Tool that removes toilet obstructions
Type of fitting with two female ends
Standing for Chlorinated Polyvinyl Chloride, this rough piping is used in water supply systems
Standing for polybutylene, a type of plastic tubing used for water systems in some parts of the country
Cross-linked polyethylene. PEX tubing, is commonly used for water supply lines and radiant floor heat systems.
Soft substance used to seal joints and fixture bases
Standing for Polyvinyl Vhloride and one of the more common plumbing terms, referring to white piping used in many home plumbing capacities
Fitting that connects one pipe to another that is smaller
Installation phase that covers waste and vent lines, drains and water
Most commonly refers to the shut-off valve located under sinks and toilets. Valves are also installed on branch lines and alongside the meter.
Slang for soldering.
Temperature and pressure valve. A valve that opens to release excess pressure and temperature in a system.
Fittings that allow pipes to be joined at a 90-degree angle. Tee-fittings for drain systems use a sweeping bend to prevent blockage. See Sweep.
A temperature control device, typically located on an inside wall that is used to set and maintain a desired room temperature
A fitting or portion of a fixture that, when properly vented, holds water to prevent entry of sewer gases.
A device that regulates the flow of water.
The upper portion of the soil stack above the topmost fixture through which gases and odors escape.